-
is there any plans/motivation to support other boards like [Radxa Zero](https://wiki.radxa.com/Zero)?
-
I have started to look at spi-bcm2835 and DMA. My FBTFT drivers are now included in raspberrypi/linux, but I need a DMA SPI driver there as well, so I can stop releasing my custom kernel.
To get DMA c…
notro updated
9 years ago
-
i buy 3.5 inch from
http://www.ebay.com/itm/181865997171?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
did it work on Raspberry pi B+ Jessie?
i download driver and tar xvf LCD-show.tar.…
-
Hi,
Would it be possible to get a RAio RA8889 based display working with the panel-mipi-dbi driver? It is about the display that is in an EdgeLogix-RPI-1000 industrial controller. A friend and I h…
-
I eventually want to use this on a Raspberry Pi with the new "fbtft" drivers, but I'm currently trying to set up a development environment on my desktop system.
So I created a virtual framebuffer, an…
-
### Creating a bug report/issue
#### Required Information
- DietPi version | `cat /boot/dietpi/.version`
G_DIETPI_VERSION_CORE=8
G_DIETPI_VERSION_SUB=12
G_DIETPI_VERSION_RC=1
G_GITBRANCH='mast…
-
I tried to make the build for the LCD display, after setting up RaspberryPi OS. However, after the make command I get the following error:
> make -C /lib/modules/`uname -r`/build M=/home/pi/pibox-o…
-
i want to use the st7789 with 320x240,
how can i rebuild the zImage? and do i need to rebuild rootfs?
-
implement LoSSI/9-bit mode in spi-bcm2835 (its basic form implemented in spi-bcm2708) so that it may become a viable option for the foundation kernel.
-
Hello, I tested a 3.2 LCD with kernel 5.4 on Raspberry Pi OS, but isn't working yet - would be great to get this up and running as 5.4 adds libcamera and IMX477 support! Thank you
autr updated
8 months ago