-
-
Environment:
Adafruit Feather M4 Express with samd51j19
5.0.0-alpha.2 on 2019-09-04
CP Lib Bundle 20190907
The code below attempts to implement the Sprite Sheet example from:
https://learn.adaf…
-
### Discussed in https://github.com/solderparty/bbq10kbd_i2c_sw/discussions/2
Originally posted by **veryalien** September 5, 2021
There seems to be a problem that all the buttons under the f…
-
I would like to add typewriter sound effects to the hid-remapper on RP 2040.
Like this: [Hackaday article about KB with integrated solenoid](https://hackaday.com/2023/07/19/solenoid-keyboard-sounds-v…
-
Nice work on curating all this info and creating the parts you have so far. It's providing a great starting point for my project.
Would be great to see what you have with the outline so far, I have…
-
Hey!
I'm using an e-ink display that is supported by this library. I've checked and call to `display.refresh()` stops and paused forever.
Do you have any clue what could be wrong?
Here is my …
-
Hello i just installed CircuitPython on my Teensy 4.0. Im trying to use a Adafruit AirLift FeatherWing - ESP32 WiFi Co-Processor. Following the [guide](https://learn.adafruit.com/adafruit-airlift-feat…
-
The PMS5003 appears to keep the RX line at 0V if power is not applied over `VCC` line. This could be detected by deinit of serial and checking RX line a few times (50ms interval?).
The RX pin assoc…
-
### Describe you new feature you'd like
There are two suggestions i see when i look at this amazing project:
- Size constrains (cause you are always complaining about it)
- You can advice the com…
-
Hi,
Any chance you would give a short rundown of this?
Is it related to PaulZC's version?
Have you had one made and used it, how did it go?
I'm quite keen on the f9p, and the feather form fa…