-
### Describe the bug
In MANUAL ELEC mode, when pushing AC TIE 1 button, CAPTAINS ND remains operational
### Steps to reproduce
Ground
BAT ON
Ground PWR ON
ELEC SYS MANUAL
AC TIE 1 OPEN
### Exp…
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
In order to maintain TTOTs and CTOTs relevant, it would be nice if they were automatically updated to the airborne time when the flight is detected airborne. Otherwise, if flights depart earlier than …
-
### Describe the bug
In MANUAL ELEC mode, when pushing AC TIE 1/2/3 button, AC TIE 1/2/3 button and AC1/2/3 indicator remains blank
### Steps to reproduce
Ground
BAT ON
Ground PWR ON
ELEC SYS MA…
-
## What feature are you suggesting?
### Overview:
Does simple flight support various flight modes such as Position, Altitude, Stabilized, and Manual !
Similar PX4 func!!
### Smaller De…
-
### Describe the bug
EDP are not commanded ON or OFF during certain phase of flight
### Steps to reproduce
Turn off left EDP (L PUMP) on HYD panel, system loose pressure
### Expected behaviour
R…