-
I can't get PrusaSlicer to find my printer by hostname. The printer uses Fluidd/Mainsail and broadcasts its hostname over multicast dns (fluiddpi.local). Adding an entry for the printer to my network'…
-
**Describe the bug**
=======================
After installing Mainsail OS, emptying the ~/printer_data/config folder, using the git-method for retrieving and installing the SV06-plus configuration, …
-
I am following this guide: https://docs.meteyou.wtf/
Building and flashing bootloaders (BTT candleLight_fw for U2C 2.1, katapult for EBB36 1.2 and 2x EBB42 1.2) using dfu-util over USB seems to go …
-
After i installed moonraker-timelapse and rebooted, I was greeted by a 502 Bad Gateway error. I promptly tried to fix this through the stated solutions on various moonraker forums and wasnt successful…
-
Could you help to add mjpg streamer in kiauh?
I have installed klipper, moonraker and fluidd via kiauh and found there is no mjpg streamer in my installation comparing when i install via fluiddpi imag…
-
### UPDATE 10/15/2022:
Some users have experienced errors during the update process. For users of MainsailOS and FluiddPi with a default installation I have pushed a script that should recover Moo…
-
Hello,
Using minicom (sudo minicom -b 19200 -o -D /dev/ttyUSB0) to read values transmitted through USB by an Arduino connected to a FTDI 232 stops at random intervals.
Tried multiple FT232 devices, …
-
received my KUSBA from lab4450.com a while ago and try to include it in my system now without success.
When pluggin in(with button pressed) the device is not recognized as a drive on my RPi.
As la…
-
KlipperScreen starts, but the output is not displayed on the external screen.
I have Klipper with Fluidd from a FluiddPi image installed on a Raspberry Pi 4 connected to the printer via UART.
The sc…
-
Have Fluiddpi / Moonraker Klipper installed on a Rpi 3b (BCM2835) and has been running fine with my Creality Ender6 that has been Klipper-ized with a custom flavour (https://3dprintbeginner.com/how-to…