-
Hi,
I'm running Rasbian the latest version on an RPI4 compute module. On it I installe olad 0.10.8. On the same host I have also 2 extra FTDI USB adapters that go to a p1 port (DSMR smart meter fo…
-
From my understanding - the control is via packets of serial data, and these can likely be sent via a USB Uart cable:
https://www.digikey.ca/en/products/detail/ftdi-future-technology-devices-internat…
-
- Need to add arduino into schematic stand-a-lone
- Include ESP-01
- include programming interfaces for both devices via ftdi
-
* Subject: Schittstellenumbennnung?
* Wiki-Page: vcontrold mit Raspberry Pi
* From: thm12345
* Date: Thu, 6 Nov 2014 22:29:07 UT
* Message-ID:
Hallo,
ich versuche gerade vcontrold auf einem RasPi …
-
Hello. Just got my new Tang Primer 20K, verified it is working with Gowin programmer on windows. Unfortunately with openFpgaLoader I am facing an issue consistently. The flashing is stopping at ~48% a…
-
### Describe the issue you are experiencing
I've been having an issue for a while that sometimes when Home Assistant Core (re)starts (for instance after installing an Home Assistant OS update or an H…
-
Repeatedly plugging USB devices possibly kills journald:
```
[525329.059196] ftdi_sio ttyUSB0: error from flowcontrol urb
[525329.060060] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now discon…
-
Hi, I have a couple of questions:
What Linux Distribution should work ? I tested both Ubuntu 18.04 and 20.04.
I already found that I should use pyftdi v0.48.3, otherwise I get the "AttributeError: '…
-
From https://github.com/dorssel/usbipd-win/wiki/WSL-support#building-your-own-usbip-enabled-wsl-2-kernel:
> These are the necessary additional features in menuconfig.
> Device Drivers -> USB Suppo…
-
### Discussed in https://github.com/harp-tech/protocol/discussions/28
Originally posted by **Poofjunior** November 26, 2023
I know many existing Harp devices are built with an FTDI chip doing …