-
## Environment
- Klayout Version: 0.29.7
- OS/Platform: linux
- XSchem 3.4.5
- NGSpice 43
## Expected Behavior
both TBs (inv_ttl_tran and inv_ttl_tran2) are expected to work since the only …
-
-
im trying to use an 0.96inch oled 128x64 i2c display but i get the error
`unsupported` display type sh1106_i2c
`
i used the instructions from [this](https://www.reddit.com/r/pwnagotchi/comments/…
-
Analog ground has a potential failure when the user connects the grounds together through the sensors they are attaching. If the analog and digital sensors share the same power place, it can short the…
-
According to some SPARQL analysis, we have over 50.000 resources linked to GND, but without the GND data for them in our graph. They can systematically be created and loaded.
The same can be done f…
kaiec updated
2 years ago
-
I was building my board and realized that the pinout of J3 (GND-VCC-SCL-SDA) did not matched the 0.96 Inch OLED Modules that I had, my modules have VCC-GND-SCL-SDA pinout. So the power input pins are …
-
create transformation do_gnd_auth_person.py
-
At the KHI the vocabulary used for artists and photographers is GND, not ULAN. Can you confirm the reconciliation between them has been done?
Perhaps we should also include gnd identifiers in the a…
-
not https://github.com/rusefi/rusefi/wiki/microRusEFI-Manual
actually https://github.com/rusefi/rusefi/wiki/Hardware-microRusEFI-wiring
https://user-images.githubusercontent.com/48498823/175553…
-
![image](https://user-images.githubusercontent.com/48498823/133940809-4e737aaa-8b39-447e-91e4-4ef60d68bc08.png)
![image](https://user-images.githubusercontent.com/48498823/133940816-e53d4277-2615-4…