-
First, I would like to thank @J-Dunn for the work on this issue mentioned here:
https://github.com/Schildkroet/GRBL-Advanced/issues/58
In particular this post:
https://github.com/Schildkroet/GR…
-
Running STM32F103RCT6 on a red rnr MACH3BOB. Working fine but the only issue is once in awhile I'll get
error:7 - A settings read failed. Auto-restoring affected settings to default values.
on pow…
-
Im having some troubles how to setup postprocessor for plasma cutter.
I tried standard PP for grbl and grblHAL from raenji-sk.
If i use Openbuilds PP `https://github.com/OpenBuilds/OpenBuilds-Fus…
-
I see there are several support questions regarding a bltouch probe, and servo support. But am unable to find any congruous approach to the topic, so I've started thinking about how to implement it 'p…
-
Thanks again for all the great work on grblHAL and IOSender.
I was working with some folks on the PrintNC Discord today investigating some odd behaviour around spindle on delay and we were comparin…
-
Hi,
I've been using the breakout board with Ethernet and bCNC - its running very well. I currently run it on Linux with a dedicated NIC to the teensy breakout board. I used the prebuilt firmware "3…
-
Hi @terjeio
Using ESP32 device with WebUI 3.0.0.a37.GH2
grblHAL firmware 1.1f-20230501
Device is ESP32 Wroom dev board
Using 4 axis WebUI is unable to parse data.
![ParsingError2](https://use…
-
I continue to have a hard time being able to predict the probe movements prior to running the probe. I trashed my probe last night due to the complexity of the probing screen and the fact that bart's…
-
This is on Debian 10.
It connects to the grbl 0.9j CNC, but it would not do any jogging.
`nick@cnc:~$ sudo pip install bCNC
Collecting bCNC
Requirement already satisfied: opencv-python==4.2.0.32…
-
Hi,
another "problem" when engraving/rastering with higher speeds the laser head is slowing down considerably, is this normal ?
I thought that laser head should be running with consistent speed an…