-
Hello. I assume that signal source is using Hamlib to retrieve the doppler value from Gpredict. Please precise on the wiki page that if the user have already configure Hamlib for another radio, the Ha…
F5MDY updated
5 years ago
-
GhostNet thru v1.2 mentions a code plug in the Ion2G ALE section but is not available. Can it be added to this site for access? Thank you.
-
I have Hamrig 1.3 installed, and the DW Binary 1.4.
I get the error "Config file line 202: PTT with RIG is only available when hamlib support is enabled.". I assume that DW has not been compiled wi…
-
I can't use pat with a Kenwood TS-480, which is a very common rig.
The problem is that the TS-480 (and presumably other rigs) has data audio in/out which is meant to be used with digital applications…
-
Where available allow supplying path/device name for serial port so that Frequency, etc. control can be controlled/read via CAT serial commands.
- [x] basic frequency control and feedback via hamlib
-…
-
Recent upgrade from Github show a "Rig Control" Menu.
As can I see, it is for control a rig from CubicSDR, used as panadapter or receiver only when using also a transmitter able to be controlled by H…
-
I'm extending my Node Red flow for remote antenna switching and would like to implement a textual interface to control it (in addition to the Dashboard interface). Ideally, this interface could be exp…
-
I'm controlling the frequency of CubicSDR using "rig control" with "Hamlib net rigctl" device selected. Commands are being sent through a rigctld server on port 4532. It works great. But if you send a…
tkzic updated
7 years ago
-
Usecase:
There are current production radios such as the IC-2730A that will do V/V,U/U,V/U dual concurrent receive with separate audio outputs for VFOA and VFOB. One could do 70cm PBBS + 2m APRS us…
ctand updated
4 months ago
-
Using Gpredict with the latest version of hamlib (4.0 rc2), when satellite tracking is engaged, a manual change of the frequency using the rig knob is overridden. E.g., if the downlink frequency is 14…