-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### PROBLEM DESCRIPTION
Flashed latest Tasmota32 onto THR316 with an attached THS01 sensor. Configured `GPIO25` as `SI7021`.
Temperature and humidity readings show `null`
Console kee…
-
**Have you look for this feature in other issues and in the wiki?**
DHT shield version v1.0.0 support [found]([https://github.com/arendst/Sonoff-Tasmota/wiki/Wemos-D1-Mini-and-DHT11-Shield-Humidity-&…
-
### Description
## Introduction
I2C host is erroneously detecting NAK when communicating to the temperature sensor HDC1080 in Fast-Speed Plus mode (1MHz).
On the image below, the host sends the a…
-
Hello.
According to Texas Instruments datasheets, the Humidity and Temperature sensor HDC1080 is software compatible with these other Texas Instruments sensors:
HDC1000, HDC1008, HDC1010, HDC1050
…
-
Hello.
Using ESP_Easy_mega_20230306_climate_ESP32_4M316k on my ESP32 board that publish temperature and humidity data via MQTT.
I use the device (sensor) "Environment - HDC1080 (I2C)" and sometimes …
-
As soon as I add #define P016_P035_Extended_AC to custom.h, I get a compile error:
'StaticJsonDocument' was not declared in this scope
my Custom.h:
```
#ifndef ESPEASY_CUSTOM_H
#define E…
-
From yesterday, every 10 minutes I take measurements (NodeMCU + CCS811). In the code I have ```delay (300000);```. I send measurements to my InfluxDB database. I visualize them using Grafan. Here are …
-
After flashing a file compiled using Custom.h, the access point does not appear, the STA mode is turned on.
If you compile the normal version, the access point works
I used esp8266
INIT : Boo…
-
I have checked certain similar issues reported:
https://github.com/closedcube/ClosedCube_HDC1080_Arduino/issues/11
https://github.com/closedcube/ClosedCube_HDC1080_Arduino/issues/13
Tried to ad…