-
Does anybody have JSON examples for new MCP23017 support?
-
In one of the latest change logs, one ca read:
Home Accessory Architect v3.0.1
"Removed needed of resseting HomeKit ID when JSON has changed HomeKit data."
I'm not sure what this means.
Can I ch…
-
Configuration page Fixed with v3.3.2 does not save wifi configuration, goes always back to setup mode...
Home Accessory Architect v3.3.2
Developed by José Antonio Jiménez Campos (@RavenSystem)
…
-
Hello no way to access setup page once flashed, I'm using wemos D1 mini as usual
**On Mac:**
Home Accessory Architect v3.3.1
Developed by José Antonio Jiménez Campos (@RavenSystem)
SETUP MODE
…
-
is there a way to set the range of temperatures in a temperature sensor? right now on my HomeKit app it clamps between 32 and 212 when I see the temperature sensor in the iOS app, even though I'm send…
-
## The problem
I have trouble discovering my Legrand wall switches in ZHA. They don't appear at all in ZHA and I don't see anything in the logs related to their discovery.
I've read on some pl…
-
I've got dozen of HAA devices flashed from scratch during last months.
However, I've got two of them not updating via OTA further:
Sonoff Basic OTA 3.0.2, HAA 2.1.1
Sonoff S20 outlet OTA 3.0.7, HAA…
-
After successfully pairing shelly 1 with HomeKit, the device disconnects from WiFi and won't reappear. Only cutting power helps to make a new connection. After some minutes up to a couple of hours it …
-
I set up a new sonoff basic with haa 1.10.0 using LCM for ota but the setup page can only be opened on its IP address `192.168.178.144`, not on its device name `HAA-93E0FD.local`. Since LCM already se…
-
Hello after several flash on my wemos d1 mini I suspect that;
{"c":{"o":0,"n":"TERCAMIRRIG","l":13,"i":1},"a":[{"0":{"r":[{"g":5,"v":1}]},"1":{"r":[{"g":5,"v":0}]},"t":20,"b":[],"s":0,"w":0,"d":360…