-
OS: Fedora 40 (KDE)
Kernel: 6.8.5-301.fc40.x86_64 (64-bit)
lm-sensors: lm_sensors-3.6.0-18.fc40.src.rpm
Output from sensors-detect (note: secure boot is on)
```
# sensors-detect version 3.6.0…
-
We need to create a I2C device functionality that will allow the MCU to relay commands from the Zynq via I2C for configuration and reading of registers on various devices that only the ~Zynq~ MCU has …
-
# ESP32-C5 support status in ESP-IDF
ESP-IDF v5.4, currently in development, will include initial support for the mass production version of the ESP32-C5 chip.
In the list below, supported featu…
-
Hi,
I've just added an I2C eeprom to a board driver and discovered that i2cmem.cpp wrongly ACKs every device id and not just its own :(
It appears wrong as follows -
On 8th rising clock from start …
-
* [x] Power supply ICSP
* [x] Power supply USB
* [x] Power supply 12V
* [x] Led Vin
* [x] Led 3.3v
* [x] Upload firmware
* [x] Led Blink
* [x] USB detection
* [x] RX Led
* [x] TX Led
* [ ] L…
-
### LVGL version
8.3.11
### What happened?
(00:00:00.177) Free heap: 277420 bytes
W (00:00:00.183) Minimum heap ever reached: 277012 bytes
W (00:00:00.190) Free heap for 8-bit allocations: …
-
# Describe the issue
Playing a sequence in the pattern editor does not loop. It seems to play once and half play again then stop.
# To Reproduce
## Steps to reproduce the behavior:
1. Go to patte…
-
I am using ESP32 with MPU6050_DMP6_ESPWiFi.ino file(The snippet of the mpu_setup() function is here
```c++
void mpu_setup()
{
// join I2C bus (I2Cdev library doesn't do this automatically)
#if …
-
Device [https://www.aliexpress.com/item/2251832668606248.html](https://www.aliexpress.com/item/2251832668606248.html) 4MP 48V POE, sensor branded as sc5239s which should be a sc223a.
Flashed with `…
-
@tukusejssirs posted the following on thread #244, which I believe warrants creating a separate issue.
I’ve just found [`i2c-nvidia-gpu`](https://www.kernel.org/doc/html/latest/i2c/busses/i2c-nvidi…