-
# Issue
On the `image_raw` and the compressed topic the desired framerate of 30 fps is not even closely reached. On average I reach with the default configuration around 16 fps.
Interestingly t…
-
**Checklist:**
- [X] I updated to the latest version available
- [X] I cleared the cache of my browser
**Release with the issue:**
Specific PR release: https://github.com/dermotduffy/frigate-ha…
-
при попытке подключить карточку в lovelease
```
- type: horizontal-stack
cards:
- type: 'custom:webrtc-camera'
entity: camera.iot_relay_53401
…
-
### System Configuration
I use Radxa Camera 8M and choose Raspberry Pi Camera V2 (because Radxa Camera 8M does not exist in `rsetup`).
![image](https://github.com/radxa-docs/docs/assets/68056715/d…
-
Version 1.1.6
Custom cards are not rendering. Revert back to 1.1.5-hotfix does not solve the issue
My config:
- type: "custom:button-card"
entity: "camera.blueiris_fron…
-
* Before opening a new issue, we wanted to provide you with some useful suggestions (Click "Preview" above for a better view):
* Consider checking out SDK [examples](https://github.com/IntelRea…
-
I installed using HACS
![image](https://user-images.githubusercontent.com/139975/184916158-34adf34d-f7a8-4d8a-a512-f2acc502d7e6.png)
and checked that the resource is set up:
![image](https://user…
garyo updated
1 month ago
-
First let me start by letting everyone know I am novice with the ESP32-CAM. Purchased 2 from Amazon. Espressif used to install firmware. Been experiencing lock ups. Several times had to reflash …
-
Hi there, appreciate the good work but I tried to combine this card with some of my switches using a vertical stack card. The card shows the live feed but the PTZ controls doesn't work. The following…
-
I recently got a Gateway laptop with this fingerprint sensor installed. Worked fine with Windows, but as far as I'm aware, there are no drivers for this device on Linux.
Here's the output of `lsusb:`…