-
- attempted to take your ili9488.py for a spin.
- using a 480x320 display.
display = ili9488.ILI9488(display_bus, width=480, height=320)
- getting a IndexError: index out of range on this line wh…
-
Hi,
Know this is not a coding problem but
it is telling me the sketch is too big. :-(
/Users/chrisvorster/Library/Arduino15/packages/esp32/tools/esp-x32/2302/bin/xtensa-esp32-elf-size -A /priv…
-
Hi,
Is the source for the driver available, either standalone or as a diff for the kernel source? It's not clear how the kernel images were built.
I see CONFIG_FB_ILI9488=y is set in the config, b…
-
Hi there,
would you mind helping me a bit.
I'm confused regarding the wiring of a raspberry pi3B+:
Panel--- Panel------RPI-------RPI pin
Pin------Label------func------number
1--------VCC-------…
-
Hi Melissa,
Have you done something following my comment (see below) posted a few days ago? Thank you for you help. Regards, RJM
=============
I read and understood the protocol used in the init …
-
hello,
I am using ILI9488 with ESP32 in 4 wire SPI mode. Constructor used is
`ILI9488 tft = ILI9488(5, 12, 4,2,14,34); //TFT_CS, TFT_DC, TFT_MOSI, TFT_CLK, TFT_RST, TFT_MISO`
When i am upload…
ZYENA updated
6 years ago
-
I have a couple of text labels that update through some variables, currently the same counter. A couple of labels are in a box along with a static string and an image, so when the counter changes, onl…
-
I apologize for the annoying intrusiveness in my questions, but I am completely confused...((( TFT 3.5" ILI9488 display (320x480) is successfully connected to the Raspberry Pi Zero W2 and displays an …
-
LVGL控件边缘出现莫名亮点,并且这样的问题会随着设置LVGL初始化时候的缓冲buff大小而改变点点的数量,当把缓冲减小的时候点点就会明显变多,buff越大,点点越小,我使用的是ESP32S3芯片,采用LVGL8.3模板,以下是buff设置大小不同的情况
![512size](https://user-images.githubusercontent.com/68137304/175766774…
-
I am using version 1.8.8 of the Arduino, trying to compile with the Arduino Nano board.
First error:
'PB1', 'PB3', 'PB0' and 'PB4' was not declared in this scope (so I commented these lines).
S…