-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
doit esp32 devkit v1
### Device Description
devki v1
### Hardware Configuration
onewire = gpio 14
i2c = gpio 21 & 22
### Version
v3.0.0
### IDE Name
arduino ide 2.3.2
### Operatin…
-
hello,
i succesfully got working ina219 with default settings, but when im trying ina3221 i cant get it to work. looks like l2C not communicating at all... is there anybody with successful setting fo…
-
Self compiled Tasmota version 13.1.0.2 by Arends (because INA3221) is not in default configuration.
When no connection to MQTT configured in Configuration/Configure MQTT then only this line is sh…
-
- sdk-nrf v2.5.x with
- https://github.com/maxd-nordic/sdk-nrf/tree/atv2-ina3221
- https://github.com/nrfconnect/sdk-nrf/pull/12784
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
**不具合の概要**
ファームウェアをビルドし、書き込んでみたのですが、画面に何もつかず、モーターも反応しません
ターミナルやデバッガーを見ても、目立ったエラーコードは特に出ていません。
**再現手順**
node js および npm の最新版を導入した環境で、
https://github.com/meganetaaan/stack-chan/blob/dev/v1.0/firm…
-
After updating a hostapd-based AP to use WPA3, which requires 802.11w (Management Frame Protection), the Orin AGX devkit which previously was able to connect to it would instead crash with the follow…
-
### Category
Hardware Compatibility
### Hardware
Heltec Wireless Tracker
### Firmware Version
Current master
### Description
@Gabrielerusso something is not right with the Heltec Wireless Track…
-
Jetson Orin Nano
```
# R35 (release), REVISION: 3.1, GCID: 32827747, BOARD: t186ref, EABI: aarch64, DATE: Sun Mar 19 15:19:21 UTC 2023
```
The below error is caused when setting the GPIO to an O…