-
Versions:
openbmc: 18caa97591
phosphor-host-ipmid: 68e82947f6
Platforms:
QEMU ast2600-evb & ast2500-evb
Description:
Enable the dynamic-sensors option in phosphor-ipmi-host_git.bbappend:
PA…
-
```
rajeshkb — Today at 12:41 PM
@GEORGE KEISHING is there any way or document available to map the ipmi command
supported in community vs test automation scripts?
```
-
```
/ # cat /sys/firmware/opal/msglog | grep -i STB
[ 83.093364969,6] MEM: parsing reserved memory from node /ibm,hostboot/reserved-memory
[ 86.447190140,5] STB: Found ibm,secureboot-v1
[ 86…
-
IPMI does not display power sensor value correctly.
IPMI displays zero for Lower Critical , Lower Non-Critical , Upper Non-Critical and Upper Critical while for the same sensor IPMI display s…
-
ipmitool supports other features besides temperature and fans, not all has any relevant corresponding service in Homebridge - see https://github.com/KhaosT/HAP-NodeJS/blob/master/lib/gen/HomeKitTypes.…
-
The fields in the SaHpiResourceInfoT are filled only for the MCH (MicroTCA Carrier Hub) and not for other FRUs (all fields are 0). This can be observed below:
1. Partial output from hpitree:
Entity …
-
**Reported by:** [Zdenek Styblik](https://github.com/zstyblik)
**Original Ticket:** [ipmitool/bugs/359](https://sourceforge.net/p/ipmitool/bugs/359)
According to Coverity, there are two memory leaks …
-
Hi, we're working with the following supermicro BMC output:
```
$ sudo ipmitool bmc info
Device ID : 32
Device Revision : 1
Firmware Revision : 3.10
IPMI Ve…
-
```
root@server:~# ipmitool sel elist
1 | 01/15/2017 | 15:27:10 | Physical Security Chassis Intru | General Chassis intrusion () | Asserted
2 | 01/16/2017 | 15:04:48 | Physical Security Chas…
-
I am currently in need of assistance with conducting tests involving IPMIutil, particularly in conjunction with a simulated BMC server such as IPMISIM or an equivalent solution.
My system setup is re…