-
I have a relatively unique use case where I need to do async Rust from a Windows DLL export (which is typically just an `fn`, not an `async fn`)
client.rs:
```rust
use std::sync::Arc;
use std:…
-
there's a bug somewhere in read mem command. everything is off by 3 bytes
-
Hello my friend. I have a bluetooth elm327 adapter pic18f25k80. But cannot compile the project since I have no pic for this compiler. You can upload the hex file?
-
How alive is all this and where could oj2534-hw be found? :)
-
Hey,
Just found this, thanks for creating the tool. I was hopping I could read the TCU for my vehicle
2013 Subaru WRX STI USDM AE5L500V TCU
SAE-J2534 Pass-Through Open Port 2.0 (Tatrix)
I g…
-
I prepared Qt 6.7.2 release and then built SavvyCAN against it on ElementaryOS 7.1 on a mid-2010 MacbookPro (Intel x86_64) per steps outlined in https://github.com/collin80/SavvyCAN/discussions/804
…
-
I would like to use j2534 to work on some smr-d based ecu (uds 500).
As far as i understand json contains com parameters ,versions, commands and checksum.
Is it possible to modify com params with a …
-
## Context
In my limited understanding, some ECUs are not accessible on the CAN bus until the EZS firewall is disabled. This appears to be the case for some newer vehicles.
Apparently for offici…
jglim updated
4 months ago
-
Hello, first and foremost **thank you** for all your work on this project. I just received my A0 about 2 hours ago and this was the first thing I wanted to test out.
I appear to have compiled the …
ghost updated
3 years ago
-
hi, have code driver PC with c# ?
or have driver.dll for test ?
code arduino compiling ok,
I need user CAN and ISO15765
thanks,
Carlos.