-
Hallo,
ich habe heute den KNX Adapter geupdatet. Version 2.0.17
Leider habe ich jetzt das Problem, dass sich der Adapter nicht mehr mit dem IP-Interface verbindet. (Verbunden mit Gerät oder Dien…
-
Line Scan in ETS doesn't work when connected through IP Tunneling. If I am connected through IP Routing (multicast interface) line scan works just fine.
KNXD_OPTS="-n 'KNX' -e 1.10.240 -E 1.10.250:…
-
Hey Again,
Version: 0.14.13
Startup: KNXD_OPTS="-e 1.1.99 -E 1.1.99:8 -u /tmp/knx -t 0xfff -f 9 -D -T -R -S -b usb:"
When sending some commands to knxd with fhem, knxd stopped working and res…
-
I don't know what I am doing wrong. I cloned your project and tried the test project with the tunneling. I changed the IP to the IP of my KNX/IP Gateway and port 3671. The same as ETS is using.
I get…
-
Hi,
I did a search to find a thermostat with humidity sensor and the only device I found was PTC20 by POER: https://de.aliexpress.com/item/4000044931140.html
I first tried to find a way to integ…
-
Hi All,
Would it be possible to add Fan Mode and Swing Mode to KNX Climate devices? It is supported by Home Assistant in other Climate integrations (e.g. Sensibo Climate). If needed I can help with t…
-
There is no direct way to find out when an integration reloads. But we can register ourselves on service_registered and service_removed to figure out if the knx services still exist.
https://www.ho…
-
Sometimes KNX devices don't switch although the regarding event happens. OH doesn't handle the missing state change.
My observation:
## Expected Behavior
The normal behavior is, that in the ev…
-
Iam Not possible to Write GA‘s with my IP Interface. The Interface Type is Wago 750-889 with KNX TP1 Clamp.
In the configuration of the Adapter the Field Phys. Adress is Not Visible.
If i Click on …
-
Some covers or blinds aren't allowed to be moved in some cases. E.g. if it is raining or it is too windy.
Of course a knx module has to make that sure, but the controls in Hassio can still be pressed…