-
Hope you are well .
I have the issue connecting xpro V5 with vfd hy02d223b .
Have separated RS cable from rest of the cables to avoid interference .
Spindle can be controlled manually but not vi…
-
My Bob (normal version) arrived today and I could not help but take it apart immediately (at least the front plate).
I'll share my findings here, because some of them are very relevant to the projec…
-
I use USRP X310, linux; GNU C++ version 7.5.0; Boost_106501; UHD_3.15.0.HEAD-0-gaea0e2de, gnss-sdr version 0.0.13.git-next-df2f84dfb
The receiver configuration is like this:
[GNSS-SDR]
;#######…
-
After building a driver to run the setup we are using here at the Oregon we though it might be useful to add the ability to just specify the OSA driver in the server configuration instead of having to…
-
I have two Linkplay A31 modules that differ in their behaviour. I try to document these modules here and maybe get some more info in the process.
# Module 1 - Originally installed on Arylic Up2Stre…
-
The question is the following :
To retrieve the value of a physical quantity measured by an instrument which changes spontaneously (let's say the voltage of a multimeter), should we define :
- a pro…
-
High voltage supplies are commonly required in ion trap experiments. These are widely commercially available but typical models have many of the following drawbacks:
- Noisy output
- Radiated RFI…
-
I'm looking for advice on how to best acquire simultaneous vector data from a yaq daemon then pass it to Bluesky via yaqc-bluesky (if that is possible). I want to acquire both in and out of phase c…
-
How to increase txpower on comfash 785ac to 30dbm
-
On PTT port add ability to send CAT commands for PTT.
Also add long version of FA and advanced MD commands.