-
Hey!
I'm trying to change Zenmuse H20 exposure mode to shutter priority and it always fails. I'm doing:
```
camera.lenses.first { $0.lensType == .wide }.setExposureMode(.shutterPriority) { error …
-
I'm trying to change H20 ISO to automatic but it fails. The exposure mode is program (also I cannot change it, see https://github.com/dji-sdk/Mobile-SDK-iOS/issues/457) so according to the documentati…
-
OctoPi with a Makerbot Replicator 2X
I am trying to have it beep, however it doesn't appear to respond to the M300 command ( M300 S300 P1000 ) from the terminal or from within Gcode file.
I have…
-
hi
When uploading a mission, we encountered the phenomenon described below. We also found a solution. Please confirm whether the solution is appropriate.
・Events that occur
For example, registe…
-
I can already run
```
roslaunch dji_osdk_ros dji_vehicle_node.launch
```
```
rosrun dji_osdk_ros camera_stream_node
```
And the fpv image is shown,but I can’t display fpv related images on rviz…
-
我想用TX2 ROS订阅M300 fpv摄像头的话题数据，是需要把M300的osdk的拓展接口连接到TX2的USB上吗，如果是，需要怎么连接（好像没有OSDK->USB的线）
-
Hello!
How to implement orbiting with M300?
For all other drones DJIHotpointAction with surrounding angle 360 do the trick.
Is it possible with M300 with SDK 4.14?
pskow updated
3 years ago
-
Hi, sending M117 (lcd message) events would be nice feature, and also M300 and M150 would be nice.
something like:
topic: octoPrint/event/M117
payload: {"message": "Hello World!"}
M300 - Play …
-
Dear DJI,
The m300 doesn't work with the mobile SDK on iOS or Android. DJI do you have any evidence to the contrary?
Thanks,
All DJI SDK Devs trying to get M300 to work
-
Injected gcode doesn't seem to apply newlines. Using regex "LAYER:{layer}" and layer 36 with the injected code:
```
G28 Y0 X0 ; home the X and Y axis
G1 Y120; move plate forward
M300 ; ring the b…