-
Is it possible to have the TFT70 BMPs? or the MakerBase Image Editor updated to open BINs. Thank you
-
The firmware https://github.com/makerbase-mks/MKS-DLC32/blob/main/MKS-ESP32-PRO-main/TFT35-firmware/ESP_TFT35_V4.1_2023082201.bin is not working on the TTS display. The screen is showing garbage. I do…
MJ666 updated
2 months ago
-
Hi,
I try with GRBL on Arduino UNO and can spin motor but when I try with GRBL on STM32 the motor did not spin.
https://github.com/makerbase-mks/MKS-Big-Current-Driver/tree/master/MKS%20TB67S109…
-
I'm using
https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware/tree/Marlin-bugfix2.0.x-MKS-2.1.3
and when use usb to add gcode and print, it gives nothing
and the sdcard working nor…
-
I am using the Robin Nano V3 with the latest Marklin 2.0 from the Makerbase Github. When I use the TFT35 V2. the temperatures read properly, but when I program for the H43, the temps swing between -9…
-
Hello @makerbase-mks !
I've been using the TFT24 for my Laser and my CNC machine, however, I'd really like to customize it. I can see that this version seems to be the 3d printer version. Can you p…
-
I built this source by IAR 7.5 and tried updating by using 16GB SD card (FAT32).
But it freezes at "Updating 100%" and it also stuck after rebooting.
If I use the same version of pre-build bin fil…
-
Hi!
I get error on install
root@mkspi:~/moonraker-timelapse# make install
YOU DONT NEED TO RUN INSTALLER AS ROOT!
You will be prompted for sudo password if needed!
Exiting...
…
-
I didn't succeed to find pin description/number for those boards, either on corresponding folder (where is also marlin firmware as of version 2 bugfix) or within datasheet folder of Makerbase github s…
-
i have take configuration.h and configuration_adv.h here : https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/firmware/Marlin2.0-MKS-Robin/Marlin
i usesource and tuto
platformio.ini …