-
### Problem description
The device connects to ZHA but there are no configuration entities. The only entity is "Firmware"
### Solution description
Compatibility with zha
### Screenshots/Vi…
-
### Describe the enhancement you're suggesting.
Hello,
I'd love to help with improving support of additional KeeLoq manufacturers.
I have multiple `.sub` files recorded from Read mode with Fl…
-
## Affected Resource(s)
Please list the resources as a list, for example:
- netbox_device
- netbox_module_type
and many others
## Expected Behavior
datasource for the netbox_manufacture…
-
The fan in the example is shown as a switch type on Homekit. Can it be changed to percentage type?
homekit_accessory_t *accessories[] = {
HOMEKIT_ACCESSORY(
.id = 1, // 配件 ID
.categor…
-
**问题描述/What happened**:
主机没有正常关联到IP，导致default-host-xxxx 启动失败，实际上包含这个IP的子网有两个，物理机类型、虚拟机类型各一个，删除虚拟机类型网络后，启动正常。
**环境/Environment**:
3.11.8
- OS (e.g. `cat /etc/os-release`):
openEuler 22.03 (L…
-
Custom app for Webtools that handles Index Plate Management for CLE.
---
- 2D barcodes will change, but indexes stay the same in each well
- exome master tray is static, gets used only once, the ali…
-
It is defined in the SXL, but it would be useful it was possible to temporarily change it in the alarm tab of RSMPGS1
-
### What happened?
I bought a brennenstuhl Thermostat( HT CZ 01), which is officially supported, is declined by Zigbee2MQTT
“ z2m: Device '0x3c2ef5fffe9af791' with Zigbee model 'TS0601' and manufa…
-
### Problem description
I bought BEOK TGM50-ZB wall thermostat but it is not recognised by HA. The device is listed as [supported on Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/TGM50-ZB.html). I …
-
## Rules
1. Just the basic pattern_test.ino was used with 1.3.0 and 1.8 library of PxMatrix
2. Connected is according to a,b,c,d, for a 64x32 1/16 scanrate panel P5 Hub 75-D with R1
3. No pixel is …