-
Thanks for sharing your library. However, I get error on compiling it for Arduino pro mini (328P-3,3V) with following errors:
> In file included from C:\Users\XXX\AppData\Local\Temp\arduino_modifie…
-
These tools are shipped only in 32-bit linux form. Unfortunately, any build uses dfu-suffix, and that in turn triggers a problem on Travis CI. The solution is probably to track down the original tools…
-
It appears that the intent was that `stm32_interrupt_enable()` and `stm32_interrupt_disable()` should be callable from C. But the header file (cores/arduino/stm32/interrupt.h) neglected to declare the…
-
Would it be possible to support this particular board with the mcci arduino-lmic stack?
https://heltec.org/project/htcc-ab01/
It consist of a ARM Cortex M0+ microcontroller plus a Semtech SX LoRa …
-
When you select a piece of XML , all relevant namespace declarations are copied into the fragment, except when the @xsi:type value has one. The net result is now an invalid fragment.
Tested with eX…
-
It would be convenient to support two UARTs on 461x boards as well.
> Small correction: Only in 4630 and 4801 (To support PMS7003 and RS485 transceiver respectively) we enabled extra HW serial USAR…
-
after LMIC_disableChannel(x) is called for say channels 0-9 and again for channels 11-72 I still see join attempts on all of the US-915 subband2 frequencies. Is this a function of TTN/server doing th…
-
eXist-db 4.4.0
When you run the following code you get illegal XML
```
xquery version "3.0";
let $xml :=
return
for $in in $xml/*
return
elemen…
-
The debug output format for RPS information does not match other debug messages:
```
10:42:46.290 -> [ 47074][D][BresserWeatherSensorTTN.ino:820] NetTxComplete():
10:42:46.290 -> 41359 ms:[ 47090]…
-
This simple test of the PM->RCAUSE.bit.WDT bit cause an error in a CMSIS Macro... Other bits in RCAUSE work fine...
Arduino 1.85
SAMD21 1.6.19
CMSIS-Atmel 1.1.0
~~~
void setup() {
if (PM…