-
**Consider raising support questions on the forum first**
There is a discussion site, [forum.mcci.io](https://forum.mcci.io), which includes a [category focused on the Arduino LMIC](https://forum.m…
-
Hi,
When I set SF11 using the function `LMIC_setDrTxpow` I can see that the Join request is always sent using SF7.
Can anyone tell me why this is the case and how I can set SF for the Join requ…
-
For me it seems LMiC code in radio.c selecting the PA Output pin of SX1276 is erraenous. Always Pin PA_BOOST is selected. This can cause malfunction, if board hardware does not wire this pin, because …
-
Hi,
I'm new to embedded programmation and I'm currently facing an issue on my UNO R3 + SX1272 configuration. (objenious network, 868MHz, France)
I'm working with the ttn-otaa given example.
I se…
-
The semtech SX1276/77/78/79 chip, which LMIC is focused on, delivers a temperature value in register 0x3c. This gives the option to create some added value with LORAWAN nodes by estimating the surroun…
-
In which file of the library, LoRaWAN frame is created? I need it for research purposes. Your help will be greatly appreciated.
-
Hello,
I use an ESP32 Pico D4 and an RFM95.
The last time I used it everything worked.
But now I get the following error in the Arduino IDE as well as PlatformIO:
pin map is:
#define PIN_LMIC_N…
-
I am using LMIC on nRF52 platform. I have successfully ported hal.cpp and now I want to switch to using interrupts. Mainly I want to sleep while waiting for RX as that's the majority of time the libra…
-
Hi,
I am using ESP32, RMF95, and sentrius rgxx gateway. I have experienced a very low success rate. Most of the time, Arduino thinks it is successful, but I only see activation on The things netwo…
ghost updated
3 years ago
-
Hi,
I ask you if it is possible to set the security keys for the ABP or OTAA connection and the devaddr and devui values interactively without having to write them directly in the firmware source…