-
**Is your enhancement proposal related to a problem? Please describe.**
Some sam0 devices have a special RWW flash section. For example a `SAMD21E17D` has a 4Kbytes section at `0x00400000`.
The curr…
-
Lista de posibles microcontroladores:
[Microchip dsPIC33EP512GM304](https://www.microchip.com/wwwproducts/en/dsPIC33EP512GM304)
[Microchip ATSAM4SD32C](https://www.microchip.com/wwwproducts/en/A…
-
We use the I2C Driver (I2C1, single Master, single instance of driver using, sending 2 bytes everytime) of Harmony (Core Version 3.10.0) with a clock of 50 kHz on a PIC32MM0256GPM064. The XC32 Compile…
-
Hello! this looks like a pretty simple but extremely useful helper for those of us trying to get started using pyedbg!
My trouble is that I'm struggling to figure out which device file I need to ch…
-
I used H3 in ubuntu 16.04, when I generated code, H3 shew "Exception cause: java.lang.NullPointerException: Security flag can't be null" error as bellow, and the process bar stop on 99%.
==========…
-
I built a project and compiled it, the program used 520 bytes showed in MPLAB X IDE
But when I executed pyupdi to download my code, terminal replied the information " **ihex too large for flash** "
…
-
Arduino recently upgraded the AVR toolchain in the macOS version from 32 bit 5.4.0 to 64 bit 7.3.0 in order to support macOs Catalina, which is 64 bit only. However, the 7.3.0 toolchain has an odd p…
-
When I follow the [instructions to Compile and Program](https://github.com/MicrochipTech/aws-iot-firmware-pic32mz/blob/master/documents/iot-ethernet-firmware-compile-and-program.md) using the [2.0.0 R…
-
Hello @spanceac,
First and foremost, thank you for your amazing job with this bootloader. I've tested several while trying to get a project running and yours was the best documented and the clearer…
-
I'm experiencing difficulties with Harmony bootloader on SAME70N20B chip. I want to build simple bootloader to be able to flash firmware via UART4.
I have downloaded MPLAB X IDE, made new project and…