-
### Document Links
README.md
### Description of the problem
The README says RESET Pin: RESET GPIO27.
The output of the test program says something different:
mifare_classic_interface_debug_print…
-
The new MIFARE Classic special/magic cards "Gen3" should be configurable using Android. The configuration commands are just issued using the APDU structure: https://github.com/RfidResearchGroup/proxma…
-
There are several known key generation/derivation algorithms out the to calculate the keys for a MIFARE Classic tag. Some of them can be found here: https://github.com/RfidResearchGroup/proxmark3/blob…
-
When I try to use mfoc on MacOS I get:
```sh
➜ mfoc -P 500 -O card.dump
mfoc: ERROR: only Mifare Classic is supported
```
But I'm using actually only Mifare Classic 1K cards:
```sh
➜ nfc-li…
-
I want to use this project to read and write Mifare 1k cards, I know the values for KeyA and KeyB but I can't find the proper combination to perform the read and write over the card.
There is a way f…
-
Library currently supports NTAG\* tags, and hopefully other 4-byte page tags (Mifare Ultralight), but it currently does not support Mifare Classic tags, which have 16-byte blocks.
-
There seems to be a problem (possibly timing) with the Mifare Classic 1k emulation
When presenting Chameleon to the reader this happens:
```
02108 ms < +2108 ms>:CODEC RX (2 b…
-
```
Most functions in mifare_classic.c contain a little prelude to check the input
data for sanity:
ASSERT_ACTIVE (tag);
ASSERT_MIFARE_CLASSIC (tag);
Some other functions don't do this. I f…
-
![Screenshot-20240216-175623](https://github.com/flipperdevices/flipperzero-firmware/assets/126610656/58514f04-9ddb-4e60-8acf-d1c7375a3b22)
![Screenshot-20240216-175616](https://github.com/flipperd…
-
The nfc-tools wiki has a number of informational pages that are not that easy to find with the current flat layout and would benefit from a move to Jekyll with a hierarchical organization.
- Documenta…