-
**Describe the bug**
The problem is that the MHP 50 always will display "overtemperature" when it heats up.
**To Reproduce**
1. Go to Heat
2. Hold the right Button till it shows a different scr…
-
i have a few questions:
1)Will it work pts200 tip (wich has basically the same form factor of ts101 tip but it has 4ohm resistance) on ts101 working with ironOS?
https://it.aliexpress.com/item/10…
-
I am trying to upload my own bootup logo but it isnt working because the logo just wont show i used a .bmp its less then 1kb and has the right resolution but if i plug it in upload it and disconnect i…
-
What about supporting MHP30 ? From the feature side it is very similar to ts80p. Externally it is basically the same iron (A B buttons, one OLED screen, type c pd and hotplate_vs_tip ), just in hotpla…
-
### Discussed in https://github.com/Ralim/IronOS/discussions/1812
Opening this as an issue, as it seems that many ppl having this exact problem, and maybe not see it on the discussions. Thanks
…
-
*I have a meeting in 1 minute, but here are the details of the power cycling issue I'm seeing for now. I'll update later with more information.*
* **I'm submitting a ...**
- [x] Bug report
- …
-
Hello guys. I would like to go back to stock Firmware, but i cant find stock TS101 on the web.
If i put the stock .hex file on the TS101 Drive in DFU-Mode - i always get an error.
Thanks
-
**Describe the bug**
When the "display orientation" is set to "A", the display is always "upside down" when I hold it in my hand, even after a reboot.
**To Reproduce**
Steps to reproduce the beha…
-
* **I'm submitting a ...**
- [X] Feature request
* **Do you want to request a *feature* or report a *bug*?**
Feature, adding TS80 build support
The TS80 runs very similar hardware to the…
Ralim updated
1 month ago
-
* **I'm submitting a ...**
- [x] Feature request
Here is a drop-in replacement of TS100 logic board that supports USB-C PD protocol - open source quick-charging protocol that is able to deliver …