-
@manyoo hello :)
I'd like to use the bindings in this library to create an example on https://github.com/dmjio/miso. I see that the code is a few versions behind (75, and HEAD of three.js is on 86)…
dmjio updated
7 years ago
-
When using the shift() function MISO data is not shifted on the falling edge of CS. Its only shifted on the first edge SCLK.
-
Hi there, we are interfacing the FT2232H with a slave device using pyftdi, using SPI for communication. We can write to the device, and it responds correctly on the logic analyzer. However, the ret…
-
It would be great if in addition to rendering to text, clay could also "render" to something more structured. That way it could be used as a DSL for inline CSS in combination with libraries like miso …
-
I think the pin mapping for the Pi Pico is incorrect.
Managed to figure out the pinout and got it working with the RFM95W.
![pico](https://github.com/lnlp/LMIC-node/assets/30005006/6f1fd600-ae01-49…
-
The current pin assignments were mostly chosen before the board layout was made, resulting in a breakout board that has a large number of long, winding traces. I'm pretty sure we could choose better p…
-
I am unable to send or receive through a STM32L051C8T7 board.. No failure in setup, but it freezes on `LoRa.endPacket();`, ` hSerial.print("4");` is never called in the code below. It also freezes wh…
-
- comp rules
- not full DSL req'd
- random walk
- ideally, composition
- swap out random walk for other policy
-
hello,bro,i am diy my espboy, When I was compiling the Arduino project, I found that nbSPI was not working.
gpio16 as reverse tft cs pin, when high level .cs pin is active.
gpio 12(the spi miso pin)…
-
Hey, is this lib expected to work on the riscv esp32s? I get a hang when I call `begin()` and `openocd` does not offer any useful info. Using a SX1276-based [MOD-LoRa](https://github.com/OLIMEX/LoRa-8…