-
https://github.com/prusa3d/Prusa-Firmware/releases/tag/v3.14.0
**Describe the bug**
The firmware update linked above says there were MBL improvements. I tried running the visualizer and it got stu…
-
I've just received my MK3S aand assembled it.
But partway through a print, at random it suddenly raises the Z axis, the print bed goes all the way to the back and repeatedly goes forward a few time…
-
This is a Prusa MK3S, with the latest firmware (3.14) printing from the SD card.
Every time I try to print a specific gcode file, the printer fails saying that there has been a z-axis error. At fi…
-
When in preview mode, after slicing a model in vase mode, in PrusaSlicer it's possible to press on the + icon in the right layers-slider and add a filament change command.
In Bambu Studio and Orca Sl…
-
Hi,
I have a P3P, using connected mode and Prusa Mk3S+.
I'm trying to pause the print in PrusaSlicer 2.5.0 with the (+) sign on the layer bar (Right click-> Add Pause print M601).
Unfortunate…
-
### Description of the bug
When printing gcode with color changes on MK3S, the LCD on printer does not show the time remaining until a color change. It only shows the total time remaining for the pri…
-
I also have the problem that other languages than English are not flashed to my Prusa MK3S #253
As mentioned in #139, a second flash command is necessary that could potentially be done through a 'c…
-
Hi! If you want the hotend cooling fan switch on when it's over 50°C (or what you chose in the firmware) you should wiring the fan to the HE1 pin (P2_04) and change the guide like below:
![Schermat…
-
With FW 3.9.0 we improved the belt test, but there have been some issue reports:
1. Belt test value changed significant. This is an expected result and we are working on a solution.
2. Belt test ran…
-
**Printer type** - MK3S
**Printer firmware version** - 3.13.2 and 3.13.3 (I had the problem with both)
**MMU upgrade** - N/A
**MMU upgrade firmware version** - N/A
**SD card or USB/Octoprin…