-
The modem.restart() function does not return. It appears to hang on:
sendAT(GF("+REBOOT"));
-
There is a design flaw that has come to my attention regarding the modem and SPI flash.
The spi flash is wired to PA12 and PA15 on the SAMD21. The modem is wired to the same pins. The current MKR…
-
I have noticed an anomaly with the MKRWAN library that prevents the application from receiving a downlink payload.
When sending a downlink to a MKR WAN device, I can see the downlink queued by the …
-
**Project:**
Helium Arduino PortentaH7 Lora Vision Shield Tutorial for Non-Engineers
**Note:** I have reduced the scope of this grant and removed the Sensor/Actuator and Machine Learning compo…
-
The [LoraSendAndReceive](https://github.com/arduino-libraries/MKRWAN/blob/master/examples/LoraSendAndReceive/LoraSendAndReceive.ino#L40) example sketch uses the `minPollInterval()` function but I can'…
-
## Description
For testing to be performed it must be easy. `/dist/tools/compile_and_test_for_board` was a stepping stone towards this.
Many boards can now run all tests in a row reliably. But …
-
my arduino module firmware reports version 1.2 which isnt here
-
Hello guys,
On the MKR WAN 1310 [product page](https://store.arduino.cc/usa/mkr-wan-1310), it says
> When properly configured, the power consumption is now as low as 104uA!
However I am not abl…
-
Hi! I'm making test with the arduino mkr 1300 + TTN, and the downlink not work, the ttn application data by node show me than the payload bytes was sent (downlink) but in the monitor serial (arduino)…
-
I believe there is an outstanding issue with binary downlinks. As reported in https://github.com/arduino-libraries/MKRWAN/issues/33, the module firmware does not handle sending a binary zero because …