-
Have tried a few times to get NUT installed with usb modbus support and haven't been successful.
I last tried following this:
https://github.com/networkupstools/nut/wiki/APC-UPS-with-Modbus-protocol…
-
Hi, I have a JK B2A8S20P with a JK RS485 adapter (GPS UART port to RS485 port), it is working OK on windows with JK monitor app. I have configured on linux your configurator, tried to use ID 0 and 1, …
-
Can you help me to figure out the issue, please?
Invertor: POW-HVM6.2M
Microcontroller: M5 Atom lite + RS232->ttl
GPIO22+GPIO19
Config as in the example
this is the part of the log
```
…
-
**Describe the problem you have/What new integration you would like**
Since Esphome is becoming more and more complete system, it would be useful to implement modbus tcp feature.
**Please…
-
Pre-built Version v2.47
I have a trial Modbus server running on an Arduino that I'm experimenting with -- I've set up some coils that are shared with discrete inputs so I expect to get the same dat…
-
Love your module! Reading out my Zonneplan inverter with the EW11a has been a success.
For some time i have been noticing intermittend data gaps. Investigation shows that home assistant tries to re…
-
Unfortunately, I am unable to establish a connection through the Heidelbridge.
I followed your instructions carefully:
- Set S4/4 and S6/2 bit 1 as instructed
- Verified the pin connections
- C…
-
## libmodbus version
3.1.10
## OS and/or distribution
Ubuntu20.04
## Environment
arm64
## Description
Jetson Xavier NX
## Actual behavior if applicable
The clien…
-
Been running Seplos bms since the start on older version.
Decided to update to the latest one and now not getting any readings just `no response received`.
Here's the snippet.
```
[20:42:24][D]…
-
Beim Lesen der Modbus Register POWER_Lx und POWER_TOTAL erhalte ich andere Formate
146 147 | POWER_L1 | Input Register | uint32_t | 2 | Leistung auf L1 in 0.1**kW** (36 entspricht 3, 6**kW**)
z.B. b…