-
What are the reasons/pros/cons of the deviations? Does it affect interoperability with other implementation of MQTT-SN? Is there a way to revert to standard MQTT-SN 1.2 behavior so devices using this …
-
Having trouble with your example WiFiUdpMqttSnClient program in that it does not successfully publish the test messages. I'm using paho-mqtt-sn gateway.
I'm bashing around in the dark a bit but I …
-
A few things having done some digging myself.
Port 6093 seems to have something to do with upgrading firmware, perhaps the reason it leaves offline mode is because it is preparing to receive an up…
-
Hi, maybe there is one how can help.
I get no data in from the DTU.
![2023-08-05 09_54_42-Home Assistant – Mozilla Firefox](https://github.com/banny310/hoymiles-dtu-homeassistant-addon/assets/138994…
-
**Is your feature request related to a way you would like Akri extended? Please describe.**
[MQTT ](https://mqtt.org/)is a key protocol in the IoT world. It would be extremely beneficial if Akri co…
-
Hey,
I am one of the „lucky“ guys who bought a HMS 800W-2T. This is the one with included wifi.
I am wondering if this device is not compatible to a DTU anymore (because of the WIFI) or if this is …
-
**Describe the bug**
I have a smart plug(not Tuya version) with cb2s module ,but the module is using a BK7231M.
I try to flash it with ltchiptool,but i get CRC error at 28%, never success,then I try…
-
### Basic Infos
#### Hardware
**WiFimanager Branch/Release:**
- [ ] Master
- [X] Development (OTA)
**Esp8266/Esp32:**
- [X] ESP8266
- [ ] ESP32
**Hardware: ESP-12e, esp01, esp25**
- […
zen85 updated
2 years ago
-
Let's use this post to discuss ways to improve the stability of the connection: use a different firmware, rebuild tasmota, etc.
-
I'm looking into somewhat similar as discussed in #6 (a prototype that relies on OpenThread for communication, based on NRF52*).
Can https://github.com/braun-embedded/rust-ieee802.15.4 be used with r…