-
**Short description**
When processing a raw file in rawtherapee-cli with a custom pp3 file with temperature correlation / autitcgreen enabled, it does not auto white balance the image. Instead, it ap…
-
This is similar to #5211, but with a different test case. I've simplified it down from a couple of hours to segfaulting in about five seconds; it is possible that it can be simplified even further, bu…
sesse updated
19 hours ago
-
```
What steps will reproduce the problem?
1. Connect to Camera
2. go to gallary
3. switch to camera
4. push the arrow up-down button
You now see thumbnails of all NEF-Files of the camaras SD-Card
…
-
```
What steps will reproduce the problem?
1. Connect to Camera
2. go to gallary
3. switch to camera
4. push the arrow up-down button
You now see thumbnails of all NEF-Files of the camaras SD-Card
…
-
Right now, I can't do this:
``` python
import nef
class BadNode(nef.SimpleNode):
def __init__(self, name):
nef.SimpleNode.__init__(self, name)
self.data=[0]
def origin_test(s…
-
Hi there,
I am fairly new at using OpenSCAD, so my knowledge is pretty limited on what it can and can't do, but I am getting the following F6 output, whereas F5 seems to work fine.
Compiling des…
-
```
What steps will reproduce the problem?
1. Connect to Camera
2. go to gallary
3. switch to camera
4. push the arrow up-down button
You now see thumbnails of all NEF-Files of the camaras SD-Card
…
-
```
What steps will reproduce the problem?
1. Connect to Camera
2. go to gallary
3. switch to camera
4. push the arrow up-down button
You now see thumbnails of all NEF-Files of the camaras SD-Card
…
-
```
What steps will reproduce the problem?
1. Connect to Camera
2. go to gallary
3. switch to camera
4. push the arrow up-down button
You now see thumbnails of all NEF-Files of the camaras SD-Card
…
-
```
What steps will reproduce the problem?
1. Connect to Camera
2. go to gallary
3. switch to camera
4. push the arrow up-down button
You now see thumbnails of all NEF-Files of the camaras SD-Card
…