-
Hello author
I am from China, the following text is from the machine translation。
When using this library in China, you need to display Chinese characters,
Now in order to change the font, I need …
-
What happened?
While you having an active source (preview/program), and a tally displaying status, if you flash the tally, goes to black and you need to deactivate the source and turn again in that s…
-
Good evening,
I have been working on a led project for some time. I recently finished my build of 4 large led matrices, each composed of 4 small 8x8 tiles and trying to control these over 4 differe…
-
While compiling, I am getting the following error. What would you suggest I try?
```
Arduino: 1.8.5 (Linux), Board: "ESPresso Lite 2.0, 80 MHz, 4M (1M SPIFFS), ck, v2 Lower Memory, Disabled, None,…
-
Hi,
Can you add support for ESP32-S3/C3 via USB port?
-
Hey , I use your LEDText library and would like to be a scrolling over 4 [Adafruit WS2812 8x8 LED Pixel Matrix](https://www.adafruit.com/products/1487) matrices running, each has driven its own pin . …
-
### The problem
I am using the `fastled_clockless` platform with a `WS2812B` chipset on both esp32 and esp8266. With both devices I get the following issue:
Let's assume I use the following min…
-
[Xlights](http://xlights.org/) is free software for scheduling lighting effects and synchronizing it with music. It can generate DMX and E1.31 protocols. There are E1.31 sketches [for the Arduino](h…
-
Hi,
I just got a Raspberry Pi 5 and am getting an error that my hardware revision is not supported.
Here is some hardware information from `cat /proc/cpuinfo`:
```
Hardware : BCM2835
Revision…
Puetz updated
7 hours ago
-
Hello,
since in Italy it is not possible to find the rgb shields, I was wondering if it was possible to make everything work with an 8x8 matrix with ws2812 led.
Thanks in advance for your reply and …