-
-
Hi there, thanks for sharing your code. I just have a question about the send_randomized_csi.m script.
If I get it right, this script is to modify the WLAN packet and let the router get the disturb…
-
## Current Behavior
Sections are misaligned. Haven't analyzed what was done but it doesn't look right.
Surprised it works.
## Expected Behavior
Firmware patched with Nexmon.
## Detailed s…
-
Any attempt to download will work at first, then eventually the Mbps rate will drop to 0 Mbps, then the connection will be reset and result in an HTTP 403 Forbidden error from the s3 bucket.
```
$…
-
Hey, after fidling with the hostapd config generated by the nano ~/P4wnP1/boot/init_wifi.sh script,
I can't seem to get it to work no matter what I try.
I've tried to run hostapd manually with t…
-
hi and good day to all
i had installed the raspbian with kernel [5.10.103], and following the command
curl -fsSL https://raw.githubusercontent.com/nexmonster/nexmon_csi_bin/main/install.sh | sudo b…
-
I'm working on a raspberry pi zero 2 w project. The 2021 pi zero 2 w model seems to be fitted with SYN43436 built-in wifi chip.
The pi is running kali pi-tail edition (2022.1) that is coming with nex…
-
Hey guys, I opened an issue here :
https://github.com/offensive-security/kali-arm-build-scripts/issues/137
Basically the problem is :
The AP is seen from other devices, but they can't connect t…
-
I have a Raspberry Pi 3, running Raspbian Jessie, and have gotten nexmon working, however when we reboot the Pi it stops working. After rebooting running 'nexutil' gives this output:
```
nex_init_n…
-
@nethunteros build a Kali Linux image with NexMon build in, see: https://build.nethunter.com/rpi3-nexmon/
(Migrated from: bcm-public)