-
Hi, thanks for your project. I have an issue: flashed nodemcu with esp8266, works pretty well, but randomly reboots or stucks. All parametets saves, but random reboot still doing. I dont have no idea …
-
Flashing newest firmware is done well using command "sudo python esptool.py --port /dev/ttyUSB0 write_flash 0x00000 ./nodemcu_latest.bin"
after that, i launch ESPlorer using command "sudo ./ESPlorer…
-
### Expected behavior
The ESP does not reboot after connecting to Wi-Fi if the "Log output" → "Default log detail" is set to "Info".
EDIT.
Added Log for succsesful wifi connection.
"Log output…
-
### Answers checklist.
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [X] I have used th…
-
One of the nice things about nodemcu-firmware is that it allows you to build small apps very easily with just esplorer/similar. You build an image with the cloud builder, flash it, and then you can bu…
-
### The problem
Using an uptime sensor will not allow firmware to build.
### Which version of ESPHome has the issue?
2024.3.0
### What type of installation are you using?
Home Assista…
-
Not sure what I'm doing wrong.
sudo npm install nodemcu-tool -g
[2020-05-31T01_25_42_597Z-debug.log](https://github.com/AndiDittrich/NodeMCU-Tool/files/4706950/2020-05-31T01_25_42_597Z-debug.log)
…
-
Hi my friend,
After I flash Faikin-8266.bin file into my nodemcu.
Flash success but I can't see wifi access point.
May I know what is problem?
-
Hello,
I managed to compile the firmware with platformio on windows.
However, uploading within platformio did not succeed. Therefore I first tried NodeMCU-PyFlasher-4.0 with firmware.bin and the e…
-
I have OS X Yosemite. SiLabs drivers for the USB-Serial adapter are installed and working. I can communicate to the board via /dev/cu.SLAB_USBtoUART and I can use it in screen, ESPlorer, esptool.py...…