-
Attempting to install gnuradio 3.7 after installing 3.8 via P$ ybombs:
$ pybombs prefix init ~/gnuradio_3.7 -a gr37
$ pybombs -p gr37 -vv install gnuradio37
Results in:
PyBOMBS.Fetcher.git - DEB…
-
first time I ran into this issue: any ideas on causes?
BladeRF microxA4 on Ubuntu 23.04
gnuradio 3.10.5.1
bladeRF-cli version: 1.9.0-git-368f0ac9
libbladeRF version: 2.5.0-git-368…
-
We have had to set taps through the arbitrary settings API using CSV format, and setting taps as a vector of complex numbers would be an ideal API addition for several devices that support configurabl…
-
While investigating a different issue, I found that the checksum test has been "turned off" in flash.c's NuandExtractField(). It smells like someone disabled it while debugging and never got back to i…
jynik updated
5 years ago
-
Hi,
would it be possible/desirable to implement an interleaved SC12_Q11 format?
This way the bitrate over USB3 could be reduced at the cost of host CPU power.
My aim is to stream 2 channels at …
-
I'm trying to get SDR# to work on the BladeRF 2.0 Micro A4. I've followed all the instructions. I get SDR# to see the device but when i try to start the device after a short pause this popup shows.
…
-
Hello,
I am trying to implement latest vesion 2019.07 of libbladerf and this call does not work anymore:
```c++
int n = bladerf_get_gain_modes(m_dev, BLADERF_CHANNEL_RX(0), 0);
…
f4exb updated
4 years ago
-
I am a newbie in SDR. Recently purchased bladeRF 2.0 micro xA4. Following the instructions to install SoapySDR bladeRF plugin from https://github.com/pothosware/SoapyBladeRF/wiki, everything seemed …
-
Passing complex values with I or Q of 1.0 or greater to bladeRF-sink causes the transmitted values for _both I and Q_ to flip sign, presumably due to silent overflow of 12-bit values.
I have a blad…
-
I've read some of your project logs on hackaday.io and have been waiting for over a year for someone to shed some light on the protocol. I noticed that you've mentioned the nRF51 several times and see…