-
- Arduino board: QtPy (M0) (n/a, issue should occur on any applicable board)
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.13
- List the steps to reproduce the problem b…
-
I've looked everywhere in this repo and can't find a part number for the OLED display. Makes sense it wouldn't be in the BOM (that just specifies the connector to the OLED), but the schematic doesn't …
str4d updated
6 months ago
-
**Is your feature request related to a problem? Please describe.**
Add support for SH1106 chipset for OLED displays. wokwi supports the SSD1306 OLED displays. There are a bunch of similar OLED displ…
-
I'm trying to get the ssd1306 library to work with a 128x64 sh1106 oled screen, but I can't seem to get it to work. I've just got a black screen. Is there something wrong in the way I'm setting it up,…
-
The lilygo-rtl_433 has both BLE and 433 on board.
After the PR from @SmittyHalibut there is no compile problem anymore, but I tried to enable both in environments.ini and it doesn't work. It only pub…
-
Hi ttapa!
Testing this code: _Control-Surface/examples/7.Displays/MCU-OLED-SSD1306/MCU-OLED-SSD1306.ino_
on my ESP32.
I can see that the code has not been tested on ESP32, only on Teensy. Do you …
-
Hi,
Just connected the oled display to STM32 throuh I2C. Unfortunately it display random dots after initialisation.
-tested several drivers ssd1306, sh1106 - no success
-I have no problem with oled…
-
Hi Im keen to use this with my Orange Pi Zero setup. Luma.oled is installed and working, and can display all the luma.examples. I'm using an SSD1306 controller OLED display connected via the i2c bus. …
-
please update these files for the current kicad as it requires the files in .pro format now
-
Hi,
I have an SSD1306 OLED 128x32 display. When I try to use an example from SSD1306 driver and build, have 2 errors:
`../../../../root/go/src/tinygo.org/x/drivers/ssd1306/ssd1306.go:38:19: SPI not …