-
On 22.11.2019 all of the routers on the entire Berlin Backbone started printing the following error messages, repeating every second.
```
Thu Nov 22 13:53:08 2018 daemon.info olsrd[7015]: Received…
-
This is a copy of issue https://github.com/freifunk-berlin/firmware/issues/628
On 22.11.2019 all of the routers on the entire Berlin Backbone started printing the following error messages, repeatin…
-
My two Homewrt routers running hnetd git master are constantly logging "stuff" going on. Every so often, a bunch of log lines appear. These bunches show up every 10-30 seconds usually. Normally I'd wr…
-
`kube-static-egress-ip ` works with assumption that director node can forward traffic to the gateway nodes. CNI's can be broadly considered to fall into two categories. Once that work using overlay ne…
-
In a dual ToR setup (attempt), with ECMP routes to some node loopback IPs and pod /26 blocks, we tried enabling IP-in-IP (to address a separate bootstrapping issue), and observed that most of the rout…
-
```
What steps will reproduce the problem?
1. Clicking on any
-
```
What steps will reproduce the problem?
1. Clicking on any
-
**What did you do?**
Does K3D support having worker nodes running on separate servers?
I run k3d create on 192.168.0.104 (node1)
I run k3d add-node --k3s https://192.168.0.104:6443 --k3s_token=my…
-
Previously hosts on the link would communicate directly. A PD host has an address that is not directly connected to the link. Meaning all traffic will have to go via the default router or there will b…
-
```
What steps will reproduce the problem?
1. Clicking on any