-
it might be nice to have a more informative string "OpenEEW-
The firmware currently sets the hostname to "openeew-sensor-eth" or "openeew-sensor-wifi"
If you do an scan on your local network, you'll…
-
- Color: Use white logo
- Font: Sliiightly increase “Provision your sensor” font size
- Alignment: Left-align text and OpenEEW logo
-
A device A8032A4DD650 used on a testBoard and is screwed down : after reprogramming it runs successfully.
Works first time after programming,(flash-openeew.sh) it with openeew-firmware151
[fla…
-
On plugging in my device with a Version150 it sometimes won't boot up.
It continues to try, however I have to unplug, wait a few seconds, then re-plug it in.
Sometimes I have to do this a couple of…
-
For my sensor, I am seeing that it won't connect to the local network Arthur2004Sid that it is configured for. This happens whether it is WiFi or WiFi/Ethernet. (I haven't tested for just Ethernet …
-
https://download.openeew.com is now available as a small https server.
It runs in a container - See https://github.com/openeew/openeew-download
It only serves firmware binaries for OTA upgrades.
Th…
-
Adding this guidance:
These are the suggestions made in order to build a community of end-users and contributors around your Linux Foundation project:
- [x] Add the Apache 2 LICENSE.md to your G…
krook updated
3 years ago
-
Add a MQTT topic to remotely reboot a device.
The topic will be
`iot-2/cmd/forcerestart/fmt/json`
-
Add a MQTT topic to dynamically adjust the STA/LTA threshold.
Some sensors in noisy environments might be too sensitive and might trigger lots of false positives.
It will be important to remotely ch…
-
With a build from the version150 branch, and only ethernet the sensor doesn't always find the ethernet.
I provision the sensor xx 4D CC CC on a WiFi network and it works.
If I plug in the Ether…