-
**Qingping cleargrass CGD1 / https://www.xiaomitoday.com/check-out-the-xiaomi-cleargrass-cgd1-3-in-1-bluetooth-temperature-humidity-alarm-clockbuy-for-13-89/**
[...]
I found code that work with ES…
-
I'm trying to scan the thermometer with a esp32 for making a simple thermostat. Scanning for the UUID value shows on other devices, but not on the ATC one. This is the ESP32 ble scanner output.
`Ad…
-
It doesn’t support bm6
https://a.aliexpress.com/_EwNjlIf . Is it possible to implement bm6 support?
Android App BM6 working correctly.
-
I am trying to receive the 433.92 MHz signals from my PIR's and door contacts and publish their states over MQTT on an ESP8266 with RXB6 superhet module. I have used RecieveDemo_Advanced.ino to decode…
-
**Summary
I don't use the default autodiscovery MQTT topic of "homeassistant" within my Home Assistant (HA) environment.
If I configure an OMG device (eg lilygo-ble) and set the base topic to be t…
-
This is a re-posting of the issue https://github.com/1technophile/OpenMQTTGateway/issues/1346 which was improperly [closed as stale](https://github.com/1technophile/OpenMQTTGateway/issues/1346#issueco…
-
Would be nice to be able to launch an app to be able to interface with the meshtastic mesh networks. This would make the phone much more viable as an actual off-grid (text strings) communication devic…
-
Hi,
Thanks for the great library !
I have used the library on wemos D1 mini pro to receive temperature and humidity from a Konig Weatherstation using the alecto_ws1700 protocol.
It works fine…
LeoVe updated
2 years ago
-
First off I would really like to thank you for your work.
I have flashed my MJWSD05MMC with your latest 4.3 beta fw
I have few questions though:
1. In you readme page it is stated that it is po…
-
Hello, Have you planned in the future version 1.8.0 to integrate the possibility of setting and configuring the IP address directly from the configuration interface?
It's too complicated for everyone…