-
**Is your feature request related to a problem? Please describe.**
I'm trying to use the OV2640 camera module on the NUCLEO-H743ZI2 board. However, the video driver for the DCMI peripheral doesn't ex…
-
We want to use ov2640 camera module with Beaglebone AI for our project. We found that ov2640.ko.xz is available under in the Linux Buster version 10. kernel version 4.19.
We understand that we will…
-
OV2640 set light is defined as
```
void ArduCAM::OV2640_set_Light_Mode(uint8_t Light_Mode)
{
#if (defined (OV2640_CAM)||defined (OV2640_MINI_2MP)||defined (OV2640_MINI_2MP_PLUS))
switch(Li…
-
My porpose is theat to see bluetooth cam which if from an ov2640 on my android device.
I used aducam_host works on PC but I haven't got any idea or apps which gets the cam images in an android device…
-
I have made a mistake during flashing in the Arduino IDE and started flashing again, while this procedure was still running.
At first i got nothing but exceptions on my serial monitor, but after some…
-
Hello,
I'm trying to get an Arducam MINI 2MP OV2640 to work with my Arduino UNO which is connected to a microSD shield. I connected both the microSD-shield and the Arducam to the pins of the Arduin…
ghost updated
6 years ago
-
From the sparse documentation I have found the following registers:
0x86 bit 2 borad LDO
0x86 bit 1 PWDN pin on sensor???
0x03 bit 6 low power mode control
0x05 bit 1, bit 2 sensor power down I/…
-
What is the procedure to use OV2640 with Raspberry Pi 3B+? Can you help me with the pin diagram as well as the various codes? I would like to use the camera to click some pictures and save it to the P…
-
### Basic Infos
#### Hardware
Hardware: ?ESP8266 UNO v2
Core Version: ??
### Description
Problem description
I followed the tutorial to the dot thats on the website. I am able to u…
-
Hello.
Are there plans to support Camera using I2S on MicroPython?
There are some ESP32 module that supports OV2640 and OV7670 cameras, Built-in Flash lamp.
https://www.seeedstudio.com/ESP32-…