-
https://github.com/shadowsocks/go-shadowsocks2/issues/224
Since outline-ss-server is based on go-shadowsocks2, this issue applies to it as well.
**Describe the bug**
go-shadowsocks2 sends TCP Kee…
-
Does this drone already work with an existing module? If not, what tools do you use to reverse the protocols? I was planning on setting up a nrf24L01 as a sniffer with an arduino or a raspberry pi and…
-
I ran a packet sniffer from my router. Without your module installed my phone data usage, not hotspot, has a ttl of 64. With your module installed my phone usage has a TTL of 65. With your module i…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I'm filing an issue against the CYW43439 reported by a user on the BTstack mailing list.
When ENABLE_LE_DATA_LENGTH_EXTENSION is added to the btstack_config.h, BTstack will enable DLE by sending a …
-
Not sure if this error is even serious as the program still runs but I get this here and there while it's running:
[-] [2020-06-29T11:31:25] Packet sniffing error detected - System.ArgumentExcept…
-
I don't believe 802.11 packets are being handled correctly. I included some test code below, when I run it on my machine I always get subype 0 and either '' or None for ssid. I know the subtype is wro…
-
Sending the acks from the USB serial packet sniffer results in them arriving after the other side has given up; need to have the `radio.c` code send them immediately on receipt of the packet, if reque…
-
Hi,
Running ofp_sniffer on 5.10.0-18-amd64 with default ket buffer timeout set to zero (`open_live()` with parameter `to_ms=0` [as being currently used on ofp_sniffer](https://github.com/amlight/o…
-
Does this CC3100 have any limitations in sniffer mode like ESP8266 has ?
i.e packet len
i.e no data bytes in frames
ghost updated
4 years ago