-
Hi,
I am using the latest version Raspbian (2022-04-04) and the latest version of Motioneye (0.42.1)
My infrared nightvision camera is connected to the internal Raspberry Pi camera port.
When …
-
I am getting this error message when running Arducam_tof_camera/build/example/cpp/example and Arducam_tof_camera/build/example/cpp/preview_depth targets.
Running the code on an Arducam TOF camera w…
-
I am using the Raspberry Pi Camera3 Wide to take pictures of a surface 17.5 cm away from the camera. The cameras are not tilted, a few of them produce sharp images (not blurry) with lens position 10, …
-
I have a python script which starts a camera in 1/2 resolution, then when I'm ready, I switch to full resolution and capture. This works for the majority of the time, but occasionally I'll get a memor…
-
I am experiencing the following issue:
When I try to activate gphoto2 --capture-tethered, the camera does not save the images to the card, which starts blinking. The photos remain in a "saving" sta…
-
### Preliminary Docs
Yes, I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
Yes, I confir…
-
Despite extensive fussing over the sensitivity, threshold, and motionAverage settings of config.py of pi-timolo, I experience many false positive motion events with the NoIR pi camera. The regular pi…
-
Get it working on mesh-orange, otherwise we use Raspbian as base.
-
We have noticed a couple of times that after some time of running, the exnvr HTTPS port closes by itself without giving any error in the log, making it unreachable. This issue is primarily observed on…
-
Perhaps digit detection with a camera an a lightweight/old pi version? To reduce the amount of pi's we could pair up students per device.