-
### Board
LilyGo T-Dongle-S3
### Device Description
ESP32-S3
### Hardware Configuration
No
### Version
v2.0.11
### IDE Name
Arduino IDE & Platform IO
### Operating System
all
### Flash fre…
-
In most modules debugging is enabled/disabled by commenting out either `#define module_dbg(...) do {} while(0)` or `#define module_dbg dbg`. This requires changing of the source file to enable/disable…
-
TICS reports that test coverage of pico_tftp is too low (TQI Code Coverage 41.55%)
Improve tests to increase the coverage. This can be done either by writing extra unit tests, or by writing RFC comp…
-
When I call `pico_sntp_sync("1.2.3.4", &cb_sntp)`, picoTCP tries to resolve "1.2.3.4" as a hostname, generating DNS requests. I do not believe this is right - rather `pico_sntp_sync()` should either a…
-
Hi
I'm porting picoTCP to an embedded system using our own baremetal system, which means I've implemented custom memory allocation functions,etc. I'm running into a problem in the function "pico_st…
-
[DHCPv6] Implement DHCP6 client - RFC3315
-
Currently, jenkins is reporting that we're warningfree for GCC, but it's using version 4.8.1.
I happened to run it through a GCC 4.9.3 (arm-none-eabi-gcc), and I did get a few warnings.
Somebody sh…
-
Hello,
I cannot compile flycast with gcc14 (gcc12 compile without issue) on my gentoo system.
x86_64-pc-linux-gnu-gcc -DTARGET_LINUX_x64 -DHOST_CPU=0x20000004 -DPICO_SUPPORT_UDP -DPICO_SUPPORT_DHC…
-
Apologies if this is the wrong place for this question, but I am having a problem with the PicoServer App.
Essentially, I have ported an ethernet driver from the Zynq7000 to the Zync Ultrascale+, a…
-
Platform / OS / Hardware: Raspberry Pi 4B / Raspbian GNU/Linux 10 (buster)
Github hash: 5f161df
Hardware: Raspberry Pi 4B
Build from source failed
A YouTube video (https://www.youtube.com/…