-
SCC pinout is wrong.
LS7366R-S quadrature counters - can't share the crystal see datasheet show how to multiple .
HN3806-AB quadrature counter encoders output are open collector - …
-
Hey I just wanted to double check about the pinout.
TX (sender) is A0
RX (receiver) and the output pin is 6
Am I reading this correct?
-
Hi,
I'm not sure what to connect to the different pinheaders.
Is there a building tutorial (like on instructables)?
H1, H2, H6, H7, P2 are not clear for me.
H should be the hall sensors. But whi…
-
Hello
Could we please get detailed pin assignments for the mainboard and toolboard of X 3 series [like you did for Q1? ](https://github.com/QIDITECH/QIDI_Q1_Pro/issues/30)
-
Pinout would be much better if kept largely compatible with the previous Robotics Cape!!!
https://github.com/beagleboard/capes/tree/master/beaglebone/Robotics
-
Can you attach a pinout schematic to explain how to connect it to a RPI ?
I can't make it to work.
-
Hi, can we get a full pinout pic for this board?
I got sent one for free, and I really want to use it, but it doesn't have a full pinout like the spider does so I can't really hook it up without ri…
-
Add support for TTGO T-Lite W5500 ESP32 Main Chip SSD1306 0.96 Inch Oled Type-c Usb Programming Development Board
Ethernet support is ready but pinout for TFT need to be documented and tested
-
Hi,
I should flash your firmware on moes gateway that have the ZS3L zigbee module, how can I flash it?
Through serial?
-
The PSE port will work successfully with any non-POE device and with any cable configuration.
2 sample industry standard (IEEE 802.3af) POE IP cameras do NOT work with the PSE port.
Both cameras…