-
Hello together,
is it possible to replace 1200mAh battery of PiSugar3 to a common other LiPo (4.000mah 3.7V / e.g. https://amzn.eu/d/5mG1oVo) battery? The 1200mAh accu lasts just 3 hours for my ap…
lh84 updated
2 months ago
-
Hi!
I have a PiSugar 2 Pro, and I'm a bit confused about the correct procedure for shutting down and starting up again.
The first time I used it, I pressed the "Activate" button for 2 seconds, t…
-
The default Raspberry Pi OS kernel currently doesn't support the SD3078 RTC, the driver is not included in the kernel.
PiSugar seems to "solve" this by talking directly to the i2c bus and basically…
-
Hello!
I sent an email to the provided but haven't heard anything.
I am trying to add an external power on/off to the pisugar 3 plus.
I am looking at your [documentation](https://github.com/…
-
#### Description
All i2c addresses are set following the manual firmware update for Pisugar 3 Plus in an attempt to get the RTC to function.
Prior to update only addresses 0x57 and 0x68 were set.
…
tetac updated
2 months ago
-
I am finding that there are discrepancies between the actual battery voltage and what is being detected by the PiSugar BMS.
When I measure the battery voltage with a multimeter, I am seeing a const…
-
Hi!
I'm charging my PiSugar using a QI charger. The charging process works as expected: goes up to 100% and then drops to 80% (as set in my configuration), then goes up to 100% again.
I found th…
-
The battery is only provided as solidworks file, can you export it to something that can be used in commonly used software?
-
**Note:** This repo is mainly about the entire PiSugar project, cases and wiki. We usually process these issues once a month. For quick response about PiSugar products, please contact pisugar.zero@gma…
-
This has been brought up a couple times in the past, but no response from PiSugar support, I've only seen responses from other users in the community.
I'm using a Raspberry Pi 4B, OzzMaker BerryGPS…