-
Hello,
Everything is in the title.
1) Unfortunately the sampling rates available in the RX-0 menu do not allow me to use my PlutoSDR with linhpsdr. Reception is impossible as audio is terrible,…
-
Hi the Meteor 2 qpsk demodulator is not working with the pluto driver.
Normally when you enable the demodulator it mutes the souud this doesn't happen with the pluto front end, tcp service shows as…
-
## Issue Description ##
Hi, I know the support for the analog devices is limited due timestamp not implemented with analog devices drivers but from other issue I know there is some test than can be …
-
# WARNING: Filling out the template below is NOT optional. Issues not filling out this template will be closed without review.
FIRST: Before reporting any bug, make sure that the bug you are re…
-
Dear Howard, PlutoPlus,
Can you publish the bitstreams for version 0.32.1 and the 0.33.3 firmware?
I would like to experiment with the Linux environment without setting up the Vivado environment.…
-
I try to get ethernet with u-boot (goal is to tftp).
It seems to crash when auto negociate the link. Any advice ?
I join defconfig and dts i modified for u-boot, inspired by the linux ones. I have …
-
We should revert the libusb check for known ADALM-Pluto VID:PID from #50 once libiio 0.24 can be assumed the required minimum version.
This is a *Todo Item* (for 2024 perhaps), **please do not comm…
-
Issue Description:
When attempting to use the SDR over Ethernet, any sample rate that exceeds 25MB/s or so of total aggregate bandwidth up+down will result in dropped samples. Transmitting TV with 6.…
-
I am dealing with the wideband signals on Bladerf. The U-shaped noise floor (which is caused by the Sigma Delta ADC) distorts my signal. On the other hand, I tried the same signal with PlutoSDR. It ga…
-
I'm having trouble getting a usable output from the reconstructor. The output file is either empty or much smaller than the compressed iqz file and has no meaningful content.
I'm running SparSDR on a…