-
Hi there. Awesome project!
I got it connected from my Thinkpad to my MDP-P905.
I noticed the reported output current in your application seems to be about 2x what is displayed on the power suppl…
-
Considerando il grande quanitativo di apparecchiature che necessitano d'essere alimentate, mi chiedo se non si possa realizzare un unico alimentatore che possa fornire tutto il necessario per il loro …
-
Hi,
First of all, thank you for your work!
I tried tonight to solder wires to the TX/RX pads, tripped, and ripped off the conductive layer on the TX1 pad; I tried recovering by scraping off a bi…
-
We encountered a power supply issue when using the Bolt device. The details are as follows:
Power Setup:
The Bolt is connected to a computer via USB. If the USB power supply is insufficient, the…
-
I had a go at a [CircuitPython implementation](https://github.com/kevinjwalters/circuitpython-examples/blob/0d845cc72b45866a345396b4bf94ad01d3a10963/pico/servo-current-mcp3208.py#L210-L231) of your C …
-
- [x] Reverse Polarity Protection
-
Hello again, I am back.
Regarding plugging in an external power supply before detaching from the USB host.
Wouldn't this cause problems with back powering the Pi Zero? Damage the Pi?
What do…
-
Hi Benoit3,
Been running the script with succes for several weeks now but I only have one issue is that the measurment data gets reset (or to different level on an power cycle.
![powercycle](http…
-
Hello @lewisxhe @LilyGO,
I would like to know if the board continues to work when the power supply is under 3.4V or not. What is the minimum power supply voltage for the board to function properly …
-
In model 101, a single 5V DC input power source was used. The system depends on a external voltage source, typically provided by a brick adapter. This solution presents several drawbacks:
- Brick a…