-
# High-level project description
The project aims to develop a real-time environmental monitoring and control system for a shelter, using the STM32 microcontroller and FreeRTOS for efficient task man…
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Install Kiuah
2. Set custom repository to - https://github.com/0xD3…
-
### Is your feature request related to a problem? Please describe.
I use Tibber and here it is connected wireless between gateway and SmartMeter-Pulse. The Pulse have a battery inside. If too many …
-
I dont know if the fan is working the same was as Förnuftig that use frequency changing and feed back for controlling the fan speed.
Is the Uppatvid doing the same or is it using Puls Wide Modulatio…
-
When flow sensor in actual setup (long cable, VFD idling) the liters constantly count up, randomly it stops tough.
 and heart rate. DigiKey has an [evaluation board](https://www.digikey.com/product-detail/en/maxim-integrated/MAXREFDES117%…
-
**Describe the bug**
If powered through a very short pulse, dispensers will not dispense. However, if powered through other means at the same time, it will work normally (see gif).
**Expected beha…
-
### The problem
Before the update I have accurate readings (lose maybe 0.1kWh over a month compared to my meter) and the 'live' power usage is also accurate to the load.
After the update it has mass…
-
currently fow sensor has very crude resolution since it only counts one or two pulses per readout
![image](https://github.com/Jonny999999/waterpump/assets/5196385/5e29f3ab-e7a9-43c6-8059-10f10ad918…
-
Hi,
First of all great work really appreciated. I had some unknown TPMS sensor in my garage for a lot of time. I tried running rtl-433 but it did not match with any of the present decoders.
I t…