-
## What are the steps to reproduce this issue?
1. Configure a WDT on boot (`import pycom ; pycom.wdt_on_boot(True) ; pycom.wdt_on_boot_timeout(15000)`).
2. Set `"safe_boot_on_upload": true`.
3. Upl…
-
I have found several cases where COM servers return VT_UNKNOWN in VARIANTs or SAFEARRAYs when the objects actually implement IDispatch. See, for instance, https://sourceforge.net/p/pywin32/bugs/712/.
…
-
On a Heltec Wireless Stick using the current source from the heltec branch using network.Bluetooth is not possible.
```
Pycom MicroPython 1.20.2.r4 [3b24896] on 2021-03-26; Heltec Wireless Stick wit…
ogra1 updated
3 years ago
-
Add hardware definitions for
- [x] pycom
- [x] syncrobit cm4
- [ ] risinghf
- [ ] linxdot radxa cm3
- [ ] syncrobit radxa cm3
These are all based on Raspberry Pi or Radxa boards
-
Does this library work with https://www.digikey.pl/en/products/detail/microchip-technology/MCP3424-E-SL/1680890 ADC? Because i cant find anything related to thie PyCom board mentioned in the descripti…
-
@ftylitak Hey Nikos, this might be completely off-topic and know the wrong place but I'm curious what issues you ran into when you say unstable:
> Meanwhile, many LTE CAT M1/NB1 networks operate with…
-
Pycom modules used: LoPy4 and WiPy3
Firmware Version: Latest Legacy (I think it is legacy v1.20.0.rc13)
I don't have the device with me so I cannot check.
* Exact steps to cause this issue
…
-
GPY Modem-ESP32 Communication Issue
==========
This document describes this hardware/firmware issue that dramatically impacts reliability and potential applications.
## Issue Description
The fun…
-
LoPy
Trying to update to Firmware version 1.1.6.b01
I think the documentation is out of date. Do I really need to run Python2? I get an error saying Serial.py library not installed though I just i…
-
See `updater_write` function here:
https://github.com/pycom/pycom-micropython-sigfox/blob/master/esp32/ftp/updater.c#L122
I suspect that when using the `pycom.ota_write`, it's possible to write be…